MOVEMENT TRAY RANGE

For moving groups of figures around the playing table both the steel paper and the lightweight magnetic sheets are available with a dark green vinyl on the non-adhesive side. For those with desert armies, the steel paper is also available with a sand-coloured vinyl.

The coloured vinyl allows individual casualties to be removed without leaving obvious patches. However, the additional 0.1mm thickness of the vinyl, by separating the magnet and the steel, slightly reduces the magnetic attraction. For movement tray applications this reduction is not significant.

• A - 10cm x 8cm (holds 20x 20mm x 20mm / 10x 20mm x 40mm)
• B - 12cm x 8cm (holds 24x 20mm x 20mm / 12x 20mm x 40mm / 6x 40mm x 40mm)
• C - 10cm x 10cm (holds 25x 20mm x 20mm / 16x 25mm x 25mm / 8x 25mm x 50mm)
• D - 10cm x 12cm (holds 30x 20mm x 20mm / 15x 20mm x 40mm)
• E - 16cm x 8cm (holds 32x 20mm x 20mm / 16x 20mm x 40mm / 8x 40mm x 40mm)
• F - 16cm x 10cm (holds 40x 20mm x 20mm / 20x 20mm x 40mm)
• G - 20cm x 10cm (holds 50x 20mm x 20mm / 25x 20mm x 40mm / 32x 25mm x 25mm / 16x 25mm x 50mm)
• H - 8cm x 8cm (holds 16x 20mm x 20mm / 8x 20mm x 40mm / 4x 40mm x 40mm)

The Green / Sand Steel Paper is intended to be used for movement trays holding magnetically based figures.

The Green Magnetic Sheets are intended to be used for movement trays holding figures having steel paper (or steel washers) on their bases. As the green vinyl is on the magnetic face, they are NOT recommended for magnetising the bases of figures as the green surface (which has less pull) will then be face down and therefore not seen - unless the figures are stored on glass shelves!

Both products can also be used to make adaptor plates for temporarily putting figures onto different base sizes.

Available in packs of 5 sheets 200mm x 150mm

Other sizes are available to special order.

Download order form with prices here.
[PDF Document - email if you have trouble!]